Introduction of Precision Surface Grinding Machine
Release time:
2021-08-02
Precision surface grinding machine is also called precision grinding machine, manual grinding machine, hand grinding machine. The accuracy of large grinding machine can reach 0.02, and the accuracy of small grinding machine can reach 0.001. The precision surface grinder can grind various planes and complex forming surfaces, and is suitable for grinding without motorized feed. The spindle adopts P4 precision rolling bearings and labyrinth seals, with good waterproof and dustproof performance, stable movement and high precision. Longitudinal ball steel guide rail, the operation is light and flexible, the column adopts large span distance guide rail, good rigidity, high stability. The whole machine adopts manual oil pump for centralized lubrication.
Precision surface grinding machine is also called precision grinding machine, manual grinding machine, hand grinding machine. The accuracy of large grinding machine can reach 0.02, and the accuracy of small grinding machine can reach 0.001.
The precision surface grinder can grind various planes and complex forming surfaces, and is suitable for grinding without motorized feed. The spindle adopts P4 precision rolling bearings and labyrinth seals, with good waterproof and dustproof performance, stable movement and high precision. Longitudinal ball steel guide rail, the operation is light and flexible, the column adopts large span distance guide rail, good rigidity, high stability. The whole machine adopts manual oil pump for centralized lubrication.
precision surface grinding machine positioning:
1. The machine tool shall reserve more than 300mm outside the maximum movement space, each foot screw shall be tightened, and the front, back and left and right levels of the table top shall be within 0.04/1000mm. Much
2. Check every three months, adjust the level of the work surface, and tighten each foot screw. How much.
precision surface grinding machine grinding wheel:
1. The selected grinding wheel must be able to withstand the weekly speed of more than 2000 m/min. What a great.
2. It is forbidden to use broken grinding wheel. What a great.
3. The flange of the new grinding wheel must be balanced. Much
4. Before formal grinding, the grinding wheel should be idling for 5 minutes. Much
5. The maximum feed stroke below 800mm is 0.03mm for grinding machines and 0.05mm for grinding machines above 800mm. How much.
precision surface grinding machine spindle:
1. Before installing the grinding wheel, make sure that the spindle rotates clockwise. What a loss.
2. When starting up, the main shaft must be opened first and then flushed. How much.
precision surface grinding machine hydraulic device:
1. Surface grinding machine using viscosity of 46 hydraulic oil. Much
The new machine needs to replace the hydraulic oil after three months of use, and then replace it once a year, and clean the oil tank at the same time. What a loss.
3. Check the hydraulic oil level every day, and the oil level should be between the lowest and highest lines. What a great.
4. Before starting the hydraulic motor, make sure that the flow speed control lever is in the closed position [2]. What a loss.
5. The magnetic absorption must be turned on first and then the hydraulic pressure must be turned on.
precision surface grinding machine lubrication device:
1. The lubricating oil uses the guide rail lubricating oil with viscosity of No. 32. Much
2. Confirm the amount of oil in the oil tank (pool) every day to ensure that it is above the offline. What a loss.
3. Check whether the oil circuit of the guide rail is unobstructed every week to prevent the oil loss of the guide rail. What a loss.
4. It is recommended to clean the fuel tank every three months. What a loss.
5. Lubricating grease shall be filled regularly as required. How much.
precision surface grinding machine around the body:
1. It is forbidden to adjust the left and right stroke when the workbench is in motion. What a great.
2. When the cable of the workbench is loose, it should be adjusted immediately. How much.
Precision surface grinding machine flushing and vacuuming device:
1. The filter screen of the dust box shall be cleaned once every two weeks. What a loss.
2. The cold water tank must be cleaned once a month. Much
3. It is forbidden to use air gun to clean the surface grinder.