CNC molding grinder maintenance should pay attention to what matters


Release time:

2021-08-06

The maintenance work of CNC molding grinder involves all kinds of dangerous alkali, and the maintenance work must comply with the safety precautions related to the surface grinder. Professional maintenance personnel must carry out fault maintenance on CNC grinding machine, and must be familiar with the instructions and books of the manufacturer and system of the surface grinding machine before checking the operation of the machine tool. In addition, in the diagnosis, repair of CNC grinding machine fault, must avoid the expansion of the fault, do not leave danger after repair, then, the following together to understand the CNC molding grinding machine maintenance should pay attention to what matters!

The maintenance work of CNC molding grinder involves all kinds of dangerous alkali, and the maintenance work must comply with the safety precautions related to the surface grinder. Professional maintenance personnel must carry out fault maintenance on CNC grinding machine, and must be familiar with the instructions and books of the manufacturer and system of the surface grinding machine before checking the operation of the machine tool. In addition, when diagnosing and repairing the failure of the CNC forming grinder, it is necessary to avoid the expansion of the failure and do not leave any danger after repair. Then, let's understand what matters should be paid attention to in the maintenance of the CNC forming grinder!

  The following are several issues that should be paid attention to during maintenance.

1) Safety precautions during maintenance

When moving the surface grinder with the protective cover removed, "clothes may be involved in the spindle and other parts; when checking the operation, please stand a little far away from the machine tool to prevent the clock from being involved in the spindle and other parts. When checking the operation of the machine tool, please do the idling operation without putting the workpiece. If the physical processing, CNC molding grinder misoperation, may cause the workpiece fall, tool tip broken, fly out, debris flying, personal injury. Therefore, stand in a safe place to carry out the inspection operation.

When opening the door of the circuit board for inspection and repair, please pay attention to the high-voltage part of the circuit board and do not touch the high-voltage part.

When the workpiece is processed in an automatic manner, first use a single block to reduce the feed rate ratio, or use the locking function of the machine tool to perform the automatic cycle processing program without inserting tools and workpieces to confirm whether the surface grinder is working properly. If the machine does not work properly, it may cause damage to the workpiece and the machine itself and the load balance of the operator.

Before running the machine, the input data must be carefully checked to prevent data input errors. In the real driving operation, subroutine and data errors may lead to the movement of the machine out of control, resulting in accidents.

The given feed speed should be suitable for hard and determined operation. Generally, each machine tool has an acceptable maximum feed speed, and the optimal feed speed is different for different operations. In the case of different feed speeds, the best feed speed must be determined by referring to the instructions of the surface grinding machine. Otherwise, it will accelerate the wear of the machine tool and cause accidents.

When using tool compensation, the direction and amount of compensation must be checked. If the input data is incorrect, the surface grinder will act abnormally, which may cause damage and damage to the workpiece and the CNC grinder itself.

When replacing the control device or module, cut off the system power supply and the total power supply of the surface grinder.

Replace the servo drive unit after turning off the power for at least 20min. After the power is cut off, the voltage of the servo drive and the spindle drive will remain. Even if the drive module is turned off for a period of time, there is a risk of electric shock. Therefore, the remaining voltage will not disappear until the turtle source is turned off for at least 20 minutes.

  2) Precautions for rhyme when replacing electronic components

When removing the control module from the system, pay attention to its installation position and the number of the connected cable. For the fixedly installed control module, record the appropriate crimping parts and screws before and after removal. When the removed pressure plate and screws are special for reinstallation, all parts in the box must be installed. Otherwise, the installation is not sufficient, there may be a new risk. When measuring the resistance value between the lines, when cutting off the power supply to measure the resistance value, the red and black pencils should be replaced to measure twice. If the two values are thick, they should be recorded.

Most of the wiring substrates of the module have solder mask, so please do not find a suitable solder joint as a measuring point to remove the solder mask during measurement. Some wiring substrates are coated with an insulating layer. In this case, the insulating layer can be cut on the solder joint for measurement.

The above introduction is what should be paid attention to in the maintenance of numerical control forming grinder. The circuit board chestnut of numerical control system uses too many two-sided or multi-layer metal perforated plates, and the printed circuit is thin and dense. Once cut off, it is difficult to re-weld. In addition, when wiring, it is easy to cut off adjacent lines. In addition, when cutting a certain line, there are places where it cannot be separated from the line and several lines must be cut at the same time.