PRODUCTS
PRODUCTS CENTER
SGM-3A818
Semiconductor industry, electronic connector industry, ceramic industry, tungsten steel industry, precision and high precision parts processing industry, precision mold industry, etc.
Classification:
Key words:
Description
Machine specifications
SPECIFICATIONS
| Project ITEM | Specifications SPEC | Model SGM-3A818 | |
| Main Specifications | Studio Size | 200 × 450mm | |
| Maximum grinding length | 465mm | ||
| Maximum grinding width | 225mm | ||
| Distance from spindle center to studio surface | 400mm | ||
| Standard Disk Size | 150 × 400mm | ||
| Left and right feed | Manual stroke | 520mm | |
| Oil pressure stroke | 500mm | ||
| Studio Speed | 0.5-25m/min | ||
| Forward and backward feed | rapid feed | 1200mm/min | |
| automatic feed | 0.05-8mm | ||
| Each rotation of the handwheel | 5mm | ||
| Handwheel per block | 0.02mm | ||
| Lifting feed | Each rotation of the handwheel | 1mm | |
| Handwheel per block | 0.005mm | ||
| Grinding wheel | Grinding wheel size | Φ205 × 13 × Φ31.7 | |
| Spindle speed 50HZ/60HZ | 3000/3600rpm | ||
| Motor | Spindle motor | 2HP | |
| Front and rear motor | 40w | ||
| Up and down motor |
3A/60w AD/400w Servo |
||
| Oil pressure motor | 1HP | ||
| suction motor | 1/2HP | ||
| Water pump motor | 1/8HP | ||
| Volume | Length * width * height (mm) | 1800 × 1320 × 1968 | |
| Weight | Net weight | 1500kg | |
|
Standard type: worktable gear transmission B: worktable copper wire transmission s: built-in dust collection 1A: left and right hydraulic drive 2A: front and rear motors, left and right hydraulic drive 3A:2A up and down fast AD:2A up and down servo (three-axis full automatic) |
|||
| Standard Accessories | |||
| Wheel flange | 1 set | Toolbox and tools | 1 set |
| Grinding wheel remover | 1 | Horizontal adjusting screw and cushion block | 1 set |
| Grinding wheel Y wrench | 1 set | Grinding wheel Φ180 × 13 × Φ31.7mm | 1 set |
| balance bar | 1 | Instruction manual and other parts table | 1 each |
| Special Accessories | |||
| optical ruler | arc dresser | angle dresser | Precision flat-nose pliers |
| Grinding wheel balance rack | paper bag filter | Automatic balancing wheel finishing wheel | Flange |
| parallel wheel | |||
3A: front and rear motors, left and right hydraulic drive, up and down fast
Online Message
Fill in the message form and leave your contact information. Our staff will contact you within 24 hours (working days).