PRODUCTS
PRODUCTS CENTER
PMM-4080AHNC
Semiconductor industry, electronic connector industry, ceramic industry, tungsten steel industry, precision and high precision parts processing industry, precision mold industry, etc.
Classification:
Key words:
Description
Machine specifications
SPECIFICATIONS
| Model | Unit | PMM-4080 | |||
| AH/AHR/AHNC | |||||
| Ability | Working area of studio | mm | 800 × 400 | ||
| Maximum left and right movement | mm | 930 | |||
| Maximum amount of movement before and after | mm | 450 | |||
| Maximum distance from the studio surface to the spindle center | mm | 720 | |||
| Maximum load weight of the working room surface | kg | 700 | |||
| Studio | Working T-slot | mm×N | 14 × 3 | ||
| Studio Speed | M/min | 5-23 | |||
| Front and rear handwheel feed | 1 grid | mm | 0.02 | ||
| 1 turn | mm | 4 | |||
| front and rear automatic feed | mm | 0.1-8 | |||
| Fast forward and backward movement | 50Hz | mm | 650 | ||
| 60Hz | mm | 950 | |||
| Grinding wheel | Grinding wheel size | mm | Φ355 × 40 × Φ127 | ||
| Spindle Revolutions | 50Hz | R.p.m | 1450 | ||
| 60Hz | R.p.m | 1740 | |||
| Upper and lower structure | Maximum amount of movement | mm | 500 | ||
| Upper and lower handwheel feed | 1 grid | mm | 0.01 | ||
| 1 Swing | mm | 2 | |||
| Automatic feed | mm | 0.001-0.04 | |||
| Up and down fast movement | M/min | 130mm/min | |||
| Motor | Spindle motor | HXP | 5 × 4 | ||
| Up and down drive motor | HXP | 80W/1000W | |||
| Oil pressure motor | HXP | 3 × 6 | |||
| suction motor | HXP | 3/4 × 2 | |||
| Water pump motor | HXP | 90W | |||
| Front and rear drive motors | HXP | 40W | |||
| Dimensions | Machine height | mm | 1880 | ||
| Floor Area | mm | 3600 × 2750 | |||
| Net weight | kg | 2800 | |||
| gross weight | kg | 3000 | |||
| H: left and right hydraulic drive AH: Front and rear motors, left and right hydraulic drive AHR: front and rear motors, left and right hydraulic drive, up and down fast AHNC:, front and rear motors, left and right hydraulic drives, up and down servo | |||||
| Standard Accessories: | |||||
| Cooling water machine | 1/set | oil pressure system | 1/set | ||
| Grinding wheel dressing seat | 1/one | Electromagnetic chuck | 1/one | ||
| Grinding wheel balance bar | 1/one | Work lamp | 1/one | ||
| grinding wheel puller | 1/one | Instruction manual and other parts table | 1/one | ||
| Grinding wheel | 1/one | Toolbox and tools | 1/set | ||
| Flange | 1/one | ||||
AHNC can customize the fully enclosed cover, as shown in Figure 2.
Online Message
Fill in the message form and leave your contact information. Our staff will contact you within 24 hours (working days).