What are the characteristics of CNC molding grinder?


Release time:

2022-07-25

CNC molding grinder is a machine tool that uses grinding tools to grind the surface of the workpiece through numerical control technology. Most grinders use high-speed rotating grinding wheels for grinding, and a few use other abrasive tools such as oilstones and abrasive belts and free abrasives, such as honing machines, ultra-precision processing machines, abrasive belt grinders, grinders, polishing machines, etc.

CNC forming grinderIt is a machine tool that uses grinding tools to grind the surface of the workpiece through numerical control technology. Most grinders use high-speed rotating grinding wheels for grinding, and a few use other abrasive tools such as oilstones and abrasive belts and free abrasives, such as honing machines, ultra-precision processing machines, abrasive belt grinders, grinders, polishing machines, etc.

CNC forming grinderCan process high hardness materials, such as hardened steel, hard alloy, etc. It can also process brittle materials such as glass and granite. The grinding machine has high grinding precision, small surface roughness and high grinding efficiency.

As a single CNC grinder, it is difficult to complete all the processing contents of a part, and it needs to be coordinated with the processing procedures of other equipment, so it is required to balance the production rhythm and workshop production capacity. Therefore, to give full play to the processing characteristics of CNC grinding machines, CNC grinding machines should reasonably arrange matching and balancing processes on other processing equipment. Although some parts are processed in small batches, ordinary lathes have complex shapes, high quality, and good interchangeability. They cannot meet the above requirements on non-CNC grinders. They can only be processed on CNC grinders, such as parabolas, cycloid cams, and special-shaped mirrors. Wait.

In order to achieve the ideal grinding speed, the numerical control forming grinder generally chooses the grinding wheel with similar aperture. However, when the diameter of the grinding wheel becomes larger, the contact arc between the grinding wheel and the workpiece also becomes larger, resulting in an increase in grinding heat, making chip removal and cooling more difficult. In order to obtain better results, there is usually a suitable ratio between the diameter of the grinding wheel and the hole of the workpiece to be ground, usually the ratio is between 0.5 and 0.9.

The wide grinding wheel used in the CNC forming grinder is beneficial to reduce the surface roughness of the workpiece, improve production efficiency, and reduce grinding wheel wear. However, if the grinding wheel is too wide, the grinding force will become larger, causing the grinding wheel extension shaft to bend and deform. The width of the grinding wheel can be selected according to the length of the workpiece, within the allowable range of the rigidity of the grinding wheel extension axis and the power of the machine tool.

CNC forming grinderMatters needing attention in daily maintenance

1. Before grinding with a gantry grinder, please correct the balance of the grinding wheel.

2. The grinding wheel of the gantry rail surface grinder must be carefully selected according to the material and hardness of the workpiece.

3. The spindle end and the grinding wheel flange should be coated with a thin oil film to prevent rust.

4. Please pay attention to the direction of spindle rotation.

5. Prohibit the use of cleaner crops and machinery.

6. Please note whether the cable is loose and adjust.

7. Please pay attention to whether the oil circuit of the oil window is unblocked.

8. Whether it is decreasing or increasing, adjust the oil quantity adjustment screw to the appropriate position.

9. Clean the dust box and filter steel once a week.

10. When the suction force is weak, please check whether the suction pipe is blocked by dust.

11. The suction pipe must be kept clean, otherwise it will cause combustion.