Specification for operation flow of precision surface grinding machine
Release time:
2022-02-27
As an important processing means of precision factory, the precision surface grinder must formulate strict process specifications, and the strict and standardized operation can ensure the stable accuracy and quality of the processed parts.
As an important processing means of precision factory, the precision surface grinder must formulate strict process specifications, and the strict and standardized operation can ensure the stable accuracy and quality of the processed parts. This article'sPrecisionThe surface grinding machine operation process specification can be used as the standard reference for the factory.
First of all, you need to be familiar.PrecisionThe operation of surface grinding machine, understand the performance of surface grinding machine.
2. Before starting the machine, wear protective glasses, work clothes, fasten clothes and sleeves, put long hair into the work cap, and do not wear scarves or gloves to operate the grinder.
3. Before operation, tools, measuring tools and objects should be put in order, and any sundries that hinder equipment operation and operation activities should be removed. Before operation, check whether the safety shield of the transmission part is complete and fixed, and deal with it in time.PrecisionSurface grinder anomalies.
4. Check before startingPrecisionWhether the transmission part and the operating handle of the surface grinder are normal and sensitive, whether the lubricating oil system of each part is unblocked, and whether the electronic ruler displays data.
5. Before starting up, adjust the limit of the left and right buffers according to the grinding length of the parts and lock them.
6, the grinding wheel installation must be static balance, after correction to rebalance. The diamond of the grinding wheel dresser must be sharp, and the height of the sharp point should be consistent with the horizontal plane of the center line of the grinding wheel. It is forbidden to use matte diamond to dress the grinding wheel.
7. Start the grinder spindle idling for 1 to 2 minutes, observe the operation, and pay attention to the height of the grinding wheel about 5cm from the table; before grinding, ensure that the lubrication and cooling system is unblocked and all parts are running normally.
8. Check parts, load and unload grinding wheels, and deal with machine failures. After the grinding wheel leaves the component, stop the machine.
9. It is not allowed to place unprocessed items on the working surface, components and electrodisks. It is forbidden to knock and calibrate parts on the working surface and permanent magnetic chuck.
10. When moving the disc switch and loading parts after adsorption, it is necessary to check its firmness before grinding. When adsorbing higher or smaller parts, it should be fixed with a plate of appropriate height to prevent the parts from loosening and causing hidden dangers of accidents.
11. When the grinding wheel is close to the part, it needs to touch the workpiece and move it away in the prohibited state. When the grinding wheel does not leave the component, it is not allowed to stop. Grinding feed should be increased from small to large, not suddenly increased. Cut evenly to prevent the grinding wheel from touchingComponentsBroken.
12. Concentrate on the operation, do not do things that have nothing to do with processing, do not leave the grinder after grinding the parts and blow the table with air pressure to prevent dust from enteringPrecisionThe track of the surface grinder affects the feel and accuracy. It is not allowed to operate the grinder without authorization or allow others to walk around the machine, especially on the side of the grinder.
13. After the operation is over, turn off the vacuum cleaner or water tank first, let the grinding wheel idle for more than 2 minutes, and cut off allPrecisionFor the power supply of the surface grinder, place the handle in the non-working position and turn off the power. Before leaving work, the tools and components should be cleaned and placed neatly, and the surface and periphery of the grinder should be cleaned. After a week of continuous work, the iron filings in the dust box or water tank should be cleaned. Do the above points well, you will basically knowPrecisionhow to operate a surface grinder.